Thermocouple isolée minérale avec pot filé et100mm de plomb Twin Twisted IEC isolé de PFA - Types K,J,T,N
Cambiar moneda
Thermocouple isolée minérale dans diverses longueurs terminatied avec 100mm, PFA isolé jumeau tordu IEC,7/0.2mm.
Besoin de votre capteur de température calibré? |
Traçable aux normes d’étalonnage ISO17025 (UKAS), Labfacility offre un choix d’un étalonnage traçable de 3 ou 5 points à l’aide de notre installation d’étalonnage interne, vous pouvez sélectionner tous les points de température entre -10 oC et 200 oC. Veuillez noter que si vous ajoutez une option d'étalonnage à votre commande, vous serez contacté concernant les informations de livraison. |
---|
Description Générale | Mineral insulated thermocouple in various lengths terminatied with 100mm,PFA insulated twin twisted IEC,7/0.2mm. |
---|---|
Type de capteur | Mineral Insulated |
Type de thermocouple | K,J,T,N |
Element/hot junction | Single element, junction insulated from sheath (offers protection against spurious electrical signals) |
Diamètre de la sonde | 1.0, 1.5, 3.0, 4.5 & 6.0mm |
Longueur de la sonde | 150, 250, 500, 1000, 1500 & 2000mm |
Matériau de la gaine | K - Stainless steel 310, J - Stainless steel 321, T - Stainless steel 316, N - Nicrosil |
Type de pot | M8 x 1.0mm fine pitch threaded pot seal (200°C) |
Longueur de câble | 100mm |
Cable Type | PFA insulated twin twisted IEC |
Noyau / Brins | 7/0.2mm |
Type de résiliation | Bare tails |
Max. Température | K +1100°C for 1.5 & 3.0mm diameters +750°C for 1.0mm diameter, J +760°C, T +400°C, N +1300°C. |
Min. Température | K -40°C, J -100°C, T -100°C, N -100°C |
Normes respectées | In accordance with IEC 584 |
Labfacility - Company Overview Presentation
Labfacility - Company Video Presentation featuring, Mineral Insulated Cable Preparation, In-House Welding, Thorough Inspection from our Quality Department, Thermocouple Cable reeled to correct spool lengths, Dedicated work stations for the various sensor configurations, Calibration Test room and Large quantities kept in stock for fast despatch.
Why is Calibration so important?
The goal of calibration is to minimise any measurement uncertainty by ensuring the accuracy of test equipment. Labfacility offer a 3 or 5 point calibration, Traceable to ISO17025 (UKAS) calibration standards, using our in-house calibration facility.
Thermocouple Product Guide - Labfacility
An overview of the different thermocouples available from Labfacility.